Tag Archives | vegan leather

Tutorial! Vegan leather necklace

We have these really cool packs of vegan leather in stock, but what can we make with them?! We put the question to the super talented Laura Howard and this is the final of four tutorials she’s written for us! Find all of the tutorials in the series here.

Take it away Laura…

DIY Vegan Leather Necklace Tutorial by Laura Howard

DIY Vegan Leather Necklace Tutorial by Laura Howard

Use a chain from an old necklace, or a length of ribbon, to make a bold geometric necklace. Use the templates provided or get creative and draw your own design!

To make this necklace you will need:

* A synthetic leather kit
* A sewing needle
* Sewing scissors
* An air-erasable fabric marker pen or an ordinary felt tip pen
* The necklace template sheet – click here to download and print the PDF
* Matching felt (I used baby blue) and sewing thread
* A necklace chain or a length of ribbon

DIY Vegan Leather Necklace Tutorial by Laura Howard

 

To make the necklace:

Use the templates provided to cut out pieces A to F from the synthetic leather. Place the paper templates on the back of the leather, trace around them using an air-erasable fabric marker or a felt tip pen then cut out the shape using sewing scissors.

DIY Vegan Leather Necklace Tutorial by Laura Howard

Sew the pieces together using whip stitch and matching sewing thread (I used blue thread throughout). Start with the smallest pieces, sewing piece A to piece B then piece B to piece C and so on, so you’re only stitching through two layers of the leather at a time.

DIY Vegan Leather Necklace Tutorial by Laura Howard

Once you’ve sewn all the pieces together, use the leather shape as a template to cut out a matching piece of felt for the back of the necklace.

DIY Vegan Leather Necklace Tutorial by Laura Howard

Place the felt and leather together then use sewing thread (in the same colour as before) to sew along the top edge, joining the layers together. Place the middle of your necklace chain (or ribbon) between the two layers, so it will be held in place when you sew around the rest of the necklace shape. Make sure there are even lengths of chain (or ribbon) sticking out from each side of the necklace.

DIY Vegan Leather Necklace Tutorial by Laura Howard

Blanket stitch around the rest of the necklace – making sure you don’t let the chain or ribbon slip out as you sew.

DIY Vegan Leather Necklace Tutorial by Laura Howard

DIY Vegan Leather Necklace Tutorial by Laura Howard

Comments { 0 }

Tutorial! Vegan leather lightning bolt brooch

We have these really cool packs of vegan leather in stock, but what can we make with them?! We put the question to the super talented Laura Howard and this is the third of four tutorials she’s written for us! Find all of the tutorials in the series here.

Take it away Laura…

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

This bold lightning bolt brooch would look great pinned to a black coat or sweater! You can also follow these steps to make brooches using the star templates, or any other shape you fancy.

To make this brooch you will need:

* A synthetic leather kit
* A sewing needle
* Sewing scissors
* An air-erasable fabric marker pen or an ordinary felt tip pen
* The brooch template sheet – click here to download and print the PDF
* Matching sewing thread
* Coordinating felt
* A brooch clasp

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

 

To make the brooch:

Use the template provided to cut out the bolt shape from yellow or metallic leather. Turn the template over and place it on the back of the leather, draw around it with a pen then cut it out with sewing scissors. Then place the bolt on a backing piece of contrasting leather.

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

Use whip stitch and matching sewing thread to sew the bolt to the backing leather.

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

Cut out the bolt, leaving a border framing the shape.

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

Use the shape you’ve just cut out as a template to cut a matching piece of felt. Turn the felt shape over and add a brooch clasp. Sew the clasp in place securely with a double thickness of matching sewing thread.

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

Place the front and back of the brooch together and sew the edges together with blanket stitch and matching sewing thread.

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

DIY Vegan Leather Lightning Bolt Brooch Tutorial by Laura Howard

Comments { 2 }

Tutorial! Vegan leather notebook cover

We have these really cool packs of vegan leather in stock, but what can we make with them?! We put the question to the super talented Laura Howard and this is the third of four tutorials she’s written for us! Find all of the tutorials in the series here.

Take it away Laura…

Vegan Leather Mini Notebook

Make a mini notebook with a faux leather cover to keep it protected in your bag or pocket! These little notebooks are simple to make, and you can easily remove and reuse the leather cover once the notebook is full.

To make the notebook you will need:

* A synthetic leather kit
* A sewing needle
* Sewing scissors
* The notebook templates page one and page two – follow the links here and here to download and print the PDFs
* Coloured card (I used one of the blank cards from this pack)
* Plain or scrap paper
Sewing thread to match the card
* 90 cm yarn in a co-ordinating or contrasting colour (I used Rico Essentials Soft Merino Aran in Berry). You could alternatively use embroidery thread or narrow ribbon.
Scissors for cutting paper and card
* A large, sharp sewing needle
* A ruler

To make the notebook:

Use the card cover template to cut a piece of blank card, then fold it in half – or just select a card from the pack I linked to. Then use the page template to cut eight pages from plain or scrap paper and fold these in half as well.

Use a large, sharp needle to poke three holes in the fold of the card, measuring their position with a ruler. Make one hole right in the centre of the fold then one above and one below it, each 3cm from the central hole.

Then poke holes in the pieces of paper (two sheets at a time) in the same positions as on the cover.

Line up the pages and the card cover, and sew them together using a double thickness of sewing thread to match the card. I started in the central hole of the card cover, leaving a length of spare thread hanging loose then returned to the centre after stitching the pages and card together, knotting the two ends of thread together securely then trimming away the excess.

Use the leather cover template to cut out a piece of the synthetic leather. Place the paper template on the back of the leather, trace around it with an air-erasable fabric marker pen or a felt tip then cut out the shape with sewing scissors.

Wrap the cover around the notebook until you’re happy with it, then unfold it and open the notebook to the first page. Use the holes in the card as a guide to pierce three matching holes through the leather.

Cut a 90 cm piece of yarn (or embroidery thread or narrow ribbon). Use the large needle to thread the yarn through the two outer holes as shown, threading it through the leather and the card of the notebook. Pull the yarn through the holes so there is an even length of yarn at each side.

Thread both ends through the central hole, pulling the yarn tight. Knot the yarn to secure the notebook and leather cover together.

Close the notebook and leather cover as shown, wrapping the yarn around it and tying a bow to secure it.

Vegan Leather Mini Notebook

Thanks Laura!

Comments { 0 }

Tutorial! Vegan leather star headband

We have these really cool packs of vegan leather in stock, but what can we make with them?! We put the question to the super talented Laura Howard and this is the third of four tutorials she’s written for us! Find all of the tutorials in the series here.

Vegan Leather Star Headband Tutorial

Vegan leather star headband tutorial

Vegan leather star headband tutorial

Vegan leather star headband tutorial

I’m so excited to share some ideas for using these awesome packs of synthetic leather. I love this stuff (especially the super-cool metallics – they’re so shiny!), it looks great and it’s really easy to cut and sew. There are loads of things you could use this fun faux leather for. Hair clips, bracelets or cuffs, patches, keyrings… you could even use your leftover scraps to add some interesting texture to cards or gift tags.

Today I’m sharing a tutorial for how to make a star headband! Show off the gorgeous metallic faux leather with a star headband! You can add lots of stars to make a super star crown, or just add a couple of stars for a bit of subtle glamour.

Vegan leather star headband tutorial

To make the headband you will need:

* A synthetic leather kit
* A sewing needle
* Sewing scissors
* An air-erasable fabric marker pen or an ordinary felt tip pen
* The headband template sheet – click here to download and print the PDF
* A plastic headband
* Coordinating felt (I used black to match the headband)
* Craft glue
* A glue gun and glue
* A heatproof mat for the glue gun
* Newspaper or scrap paper to protect your workspace

To make the headband:

Use the templates provided to cut out as many stars as you want – I cut one large star and four small stars. Trace the star shapes onto the back of the leather using a pen then cut them out with sewing scissors.

Vegan leather star headband tutorial

Cut pieces of felt slightly bigger than each star. Turn the stars over and place them on some newspaper or scrap paper. One by one, cover the back of each star with a layer of craft glue and then firmly press a piece of felt on top covering the star completely. Turn the felt and attached stars over and set them aside to dry.

Vegan leather star headband tutorial

Once the glue has completely dried cut away the excess felt, leaving stars which are leather on one side and felt on the other.

Vegan leather star headband tutorial

Use a glue gun to stick the stars to a headband. Add a line of glue down the centre of one of the stars, on the felt side. Carefully press the star into position on the headband, holding it in place until the glue has dried enough to stick it firmly. Repeat to add the rest of the stars.

Vegan leather star headband tutorial

Vegan leather star headband tutorial

IMPORTANT: take care when working with the glue gun as the glue gets very hot! Always place it on a heat-proof mat when not in use, and use newspaper or other scrap paper to protect your workspace. Work slowly, squeezing the gun with care to control the amount of glue you’re using and keeping your fingers out of the way of the hot glue.

Vegan leather star headband tutorial

Vegan leather star headband tutorial

Vegan leather star headband tutorial

Vegan leather star headband tutorial

A huge thank you to September Pictures for taking photos for this post (tutorial photos taken by Laura herself) and to Sophia for her excellent modelling!

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

Comments { 0 }