DIY Embroidered Plant Lady brooches tutorial

We are obsessed with Laura Howard‘s latest creation: Plant Lady brooches! Perfect handmade flair to show off your plant lady status or a fabulous gift – Mother’s Day is just around the corner and let’s not forget it! Over to you, Laura…

DIY Embroidered Plant Lady brooches tutorial

Add a bit of plant lady style to your outfits with these fun felt brooches! There’s an embroidered “plant lady” badge, a cute cactus and a massive monstera leaf.

These leafy designs would make great gifts for the plant-lovers in your life. You could also leave off the brooch backs and use the designs as patches to sew on your rucksack, jacket, or other items that don’t need regular washing.

Finished sizes:

Monstera – 3.5″ x 2.75″
Plant Lady – 2.25″ round
Cactus 2.75″ x 2″

Tools & Materials:

The template sheet provided
Evergreen, Grassy Meadows, Chartreuse, Fuchsia, and Cotton Candy wool blend felt
Matching sewing threads
Light green, mid green, dark green, light pink and white embroidery thread (I used DMC 699 for the dark green, DMC 905 for the mid green, DMC 907 for the light green, DMC 603 for the pink, and DMC BLANC for the white.)
Brooch clasps
White tissue paper
A pencil or fine pen
A sewing needle and pins
Sewing scissors or embroidery scissors (these are great for cutting out small shapes!)
Optional: an air erasable fabric marker
DIY Embroidered cactus brooch tutorialTo make a cactus brooch:

Use the templates provided to cut one green cactus from bright green felt, one plant pot from light pink felt, and one heart from bright pink felt.

One by one, sew the shapes to a backing piece of dark green felt. Use whip stitch and matching thread, taking care to sew the bottom edge of the cactus and the top edge of the plant pot flush with each other.

Add the stitched spines to the cactus, sewing lots of single stitches with two strands of white embroidery thread (out of the six strands in the skein).

Cut a small flower from fuchsia felt. You can carefully cut this freehand, or draw a flower on the felt with an air erasable marker pen and cut it out. Sew the flower in position with three strands of light pink embroidery thread, sewing one stitch along each petal as shown.

Trim away the backing felt, leaving a narrow border around the cactus design. Then use the shape you’ve just cut out as a template to cut a matching backing piece from dark green felt.

DIY Embroidered Cactus brooch tutorial

Turn over the backing shape. Sew a brooch clasp in position with a double thickness of matching sewing thread. Place the front and back of the brooch together and sew around the edges with whip stitch and more matching thread.

 

DIY Embroidered Plant Lady brooches tutorialTo make a Plant Lady brooch:

Trace the brooch design onto a piece of white tissue paper, with a sharp pencil or a fine pen. Roughly cut out the design and sew it to a piece of light pink felt with large tacking stitches.

Embroider the lettering and the outlines of the leaves with backstitch, sewing small stitches as you sew around the curves. Use three strands of dark green embroidery thread (from a skein of six strands) for the lettering, and two strands of mid green thread for the leaves.

Remove the tacking stitches and gently tear away the tissue paper, carefully removing any remaining small pieces of paper with a pin.

Fill in the leaves with two strands of light green embroidery thread, as shown.

Trace the circular brooch shape onto a piece of white tissue paper and cut it out. Position this over your stitching so it’s centred and pin it in place. Cut around the circle then unpin and discard the tissue paper.

Place the felt circle on a piece of bright green felt and whip stitch it in position with matching pink sewing thread.

Trim the green felt, leaving a narrow border around the pink circle. Use this shape as a template to cut out a matching backing piece of bright green felt.

DIY Embroidered Plant Lady brooch tutorial

Turn the backing piece over. Sew a brooch clasp in position with a double thickness of matching sewing thread. Place the front and back of the brooch together and sew around the edges with whip stitch and more matching thread.

 

DIY Embroidered monstera brooch tutorialTo make a monstera leaf brooch:

Use the template provided to cut out a monstera leaf from mid green felt. Place it on a piece of light pink felt and sew it in position with whip stitch and matching mid green sewing thread.

Embroider the veins of the leaf, using the photo and the drawing on the template as a guide. Use backstitch and three strands of mid-green embroidery thread (from the six strands in the skein). Start by sewing the central line down the middle of the leaf then add the other lines.

Trim the backing felt, leaving a narrow border of felt around the leaf. Use this shape as a template to cut out a matching backing piece of pink felt.

DIY Embroidered Monstera Brooch tutorial

Turn the backing shape over. Sew a brooch clasp in position with a double thickness of matching sewing thread. Place the front and back of the brooch together and sew around the edges with whip stitch and more matching thread.

Show off your Plant Lady brooches with the hashtag #thevillagehaberdashery so we can see what you make!

DIY Embroidered Plant Lady brooches tutorial

DIY Embroidered Plant Lady brooches tutorial

DIY Embroidered Plant Lady brooches tutorial

, , , , ,

One Response to DIY Embroidered Plant Lady brooches tutorial

  1. Di March 22, 2018 at 6:11 am #

    These brooches are gorgeous. Thank you for sharing.

Leave a Reply